Carbide drill bits.
S-4 Plus carbide drill bits are designed for use in a rotary hammer equipped with an SDS
(slotted drive shaft) type chuck. The single tip bits are manufactured to conform with ANSI
Standard B212.15 and can be used to drill in concrete, block, brick and soft stone.
| size | 5/32″ x 6″, 3/16″ x 4″, 3/16″ x 6″, 3/16″ x 8″, 3/16″ x 10″, 3/16″ x 12″, 3/16″ x 14″, 7/32″ x 8″, 7/32″ x 10″, 7/32″ x 12″, 7/32″ x 16″, 1/4″ x 4″, 1/4″ x 6″, 1/4″ x 8″, 1/4″ x 11″, 1/4″ x 14″, 1/4″ x 16″, 1/4″ x 20″, 5/16″ x 6″, 5/16″ x 12″, 3/8″ x 6″, 3/8″ x 10″, 3/8″ x 12″, 3/8″ x 18″, 3/8″ x 24″, 7/16″ x 6″, 7/16″ x 12″, 1/2″ x 6″, 1/2″ x 10″, 1/2″ x 12″, 1/2″ x 18″, 1/2″ x 24″, 9/16″ x 6″, 9/16″ x 12″, 5/8″ x 8″, 5/8″ x 12″, 5/8″ x 18″, 11/16″ x 8″, 11/16″ x 12″, 3/4″ x 8″, 3/4″ x 12″, 3/4″ x 18″, 27/32″ x 8″, 7/8″ x 8″, 7/8″ x 12″, 7/8″ x 18″, 1″ x 8″, 1″ x 10″, 1″ x 12″, 1″ x 18″, 7/32″ x 6″, 3/16″ x 5″, Spline to SDS adapter, SDS Max Adapter |
|---|---|
| usable length | 4″, 2″, 6″, 8″, 10″, 12″, 14″, 9″, 18″, 16″, 22″, 3″, na |
| pouch or pack | 1, 25, 15 |
